|
Written by Administrator
|
|
Tuesday, 17 November 2009 |
|
LP-8616
802.11n Wireless AP Router (1T1R)

Features
Support advanced 1 x 1 MIMO Technology with up to 150Mbps downstream and upstream
Realtek RTL8196B
Complies with 2.4GHz IEEE802.11n and IEEE802.11g/b standards
Low Noise Amplifier(LNA) support
Support 20Mbps and 40Mbps bandwidth
Operation mode: Gateway, Bridge, Wireless ISP
Wireless mode: AP, Client, WDS, AP+WDS
DHCP Server/Client
RF output power adjustable
Virtual DMZ, Port Forwarding
Dynamic DNS
TCP/UDP/ICMP/ARP protocol stack
Firewall, URL/IP/Port/MAC filtering
Wireless users access control
Multiple SSID
NTP client
Wireless security - 64/128bit WEP, WPA TKIP, WPA2AE2, 802.1x
Support PPPoE, VPN pass-through(PPTP and L2TP)
QoS enhancement - WMM
Support Microsoft LLTD(Link Layer Topology Discovery)protocol
Support Microsoft Vista Basic logo for wireless router
WPS(Wi-Fi Protected Setup) via PIN
Easy quick setup wizard with web-based utility
| Specifications |
| Standard l IEEE 802.11n Draft 2.0 l IEEE 802.11g/b |
Operation Mode RFl Gatewayl Bridge l Wireless ISP |
| Frequency Bandl 2.400GHz ~ 2.484GHz |
Sensitivityl -89dBm @ 802.11n l -91dBm @ 802.11g l -93dBm @ 802.11b |
| Data Ratel 802.11n(40MHz): up to 150Mbps l 802.11n(20MHz): up to 72Mbps l 802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps l 802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back |
Output Power(Typical)l 802.11b: up to 17 ± 1 dBm l 802.11g: up to 15 ± 1 dBm l 802.11n: up to 14 ± 1 dBm |
| Number of operation channel l U.S. 1-11 l Japan 1-13,14l EETSI 1-13 |
Antennal One detachable antenna (Male SMA reverse) |
| Wireless Model APl Client l WDS, AP l WDS |
Dimension(mm) l 146(L) x 100(W) x 24(H) |
| Security l 64/128bit WEPl WPA(TKIP with IEEE 802.1x) l WPA2(AES with IEEE 802.1x)l WPA Mixed |
Storage Humidityl 10% ~ 90% (Non-condensing) |
| Operation Temperaturel Operation: 0°C ~ 60°C |
| Access Protocol l CSMA/CA |
Connectorl One antenna connectorl One RJ-45 port for WANl Four RJ-45 LAN portsl Reset to default button l WPS buttonl Power jack |
| Power requirementl DC12V/1A |
|
|
|
Last Updated ( Friday, 12 March 2010 )
|