802.11n Draft 2.0 Wireless AP Router (2T4R)

Features

Support advanced 2 x 4 MIMO Technology with up to 300Mbps downstream and upstream

Realtek RTL8651C + RTL8190

Complies with 2.4GHz IEEE802.11n Draft 2.0 and IEEE802.11g/b standards

Low Noise Amplifier(LNA) support

Support 20Mbps and 40Mbps bandwidth

Operation mode: Gateway, Bridge, Wireless ISP

Wireless mode: AP, Client, WDS, AP+WDS

DHCP Server/Client

RF output power adjustable

Virtual DMZ, Port Forwarding

Dynamic DNS

TCP/UDP/ICMP/ARP protocol stack

Firewall, URL/IP/Port/MAC filtering

Wireless users access control

Multiple SSID

NTP client

Wireless security - 64/128bit WEP, WPA TKIP, WPA2 AE2, 802.1x

Support PPPoE, VPN pass-through(PPTP and L2TP)

QoS enhancement - WMM

Support Microsoft LLTD(Link Layer Topology Discovery) protocol

Support Microsoft Vista Basic logo for wireless router

WPS(Wi-Fi Protected Setup) via PIN and PBC

Easy quick setup wizard with web-based utility

3 detachable antennas and 1 built-in antenna

SPECIFICATIONS

Standard	IEEE 802.11n Draft 2.0
Standard	IEEE 802.11g/b
Frequency Band	2.400GHz ~ 2.484GHz
Data Rate	802.11n(40MHz): up to 300Mbps
	802.11n(20MHz): up to 144Mbps
	802.11g: 54, 48, 36, 24, 18, 12, 9 & 6Mbps
	802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
Access Protocol	CSMA/CA
Number of operation channel	U.S. 1-11
	Japan 1-13,14
	EETSI 1-13
Wireless Mode	AP
	Client
	WDS, AP
	WDS
Security	64/128bit WEP
	WPA(TKIP with IEEE 802.1x)
	WPA2(AES with IEEE 802.1x)
	WPA Mixed
Operation Mode	Gateway
	Bridge
	Wireless ISP
Sensitivity	-89dBm @ 802.11n
	-91dBm @ 802.11g
	-93dBm @ 802.11b
RF Output Power(Typical)	802.11b: up to 17 ± 1 dBm
	802.11g: up to 15 ± 1 dBm
	802.11n: up to 14 ± 1 dBm
Antenna	Three detachable antenna (Male SMA reverse)
Antenna	One built-in antenna
Dimension(mm)	180(L) x 130(W) x 30(H)
Storage Humidity	10% ~ 90% (Non-condensing)
Operation Temperature	Operation: 0°C ~ 60°C
Connector	Three antenna connector
	WPS button
	One RJ-45 port for WAN
	Four RJ-45 LAN ports(1 x GIGA port + 3 x 10/100Mbps ports)
	Reset to default button
	Power jack
Power requirement	DC 12V/1A